Retail:  +38 (057) 732-44-72
Wholesale:  +38 (050) 301-38-63  
  +38 (057) 771-45-98

Induction three-phase electric motors 

with integrated electro-magnetic brake

Электродвигатель со встроенным эл.маг.jpg

The motors are designed for drive of mechanisms, which need fixed stop in regulated time (electric hoists, treating machines, automatic transport and storage systems, etc.) Braking device shall be mounted from the side opposite to the side with free shaft end and provide fast motor braking in case of power switching off. In case if starts voltage supply on electric motor begins it’s unbraking. Usage of such motors reduces duration of cycle and increasing frequency of switching on. So, it facilitates to increasing of manufacturing intensity. The motors are designed to operate with three-phase AC.

  • Frequency – 50 and 60 Hz
  • Voltage – 220-660 V
  • Protection degree of motor – IP54
  • Protection degree of current lead – IP54
  • Protection degree of brake – IP44
  • Operating mode – S4 (repeatedly short-term with operational duration of 40%)
  • Insulation class – F.

                                                                    Technical characteristics in case of 380 V, frequency of 50 Hz

TypeOutput,
 kW
Rotation
 speed,
 rpm
Efficiency,
 %
Cos φ     Мstart
    ——
    Мnom
    Мmax
    ——
    Мnom
  Istart
  ——
  Inom
Average
noise
 level, dB(A)
Rated 
braking
 torque, N/m
Weight, kg 
IM 1081
AIR 80 A2 E1.5300080.00.852.12.27.0702015.8
AIR 80 B2 E2.2300082.00.872.02.27.0702018.1
AIR 90 L2 E3.0300083.50.882.02.27.0734024.1
AIR 80 A4 E1.1150075.50.772.22.25.5612015.2
AIR 80 B4 E1.5150076.00.812.12.25.5632017.2
AIR 90 L4 E2.2150080.50.822.12.26.5634022.9
AIR 80 A6 E0.75100069.00.712.02.24.5602015.1
AIR 80 B6 E1.1100073.00.742.02.24.5602018.7
AIR 90 L6 E1.5100075.00.722.02.26.0604023.7
AIRS 90 L6 E1.7100071.00.702.02.26.0654023.7
AIR 80 A8 E0.3775062.50.591.81.94.0572016.7
AIR 80 B8 E 0.55 750 64.0 0.6 1.8 1.9 4.0 57 20 18.4
AIR 90 LA8 E 0.75 750 71.5 0.71 1.4 2.0 4.0 62 40 22.1
AIR 90 LB8 E 1.1 750 76.0 0.72 1.4 2.0 3.5 62 40 25.1
AIR 90 L4/2 E 2.2/2.65 1500/3000 78/77 0.83/0.86 1.9/1.9 2.4/2.4 6.0/6.0 72 25 26.1
AIR 90 L6/4 E 1.32/1.6 1000/1500 73/73 0.68/0.83 2.0/1.6 2.5/2.5 5.0/5.5 66 25 26.3
AIR 80 A8/2 E 0.18/0.75 750/3000 42/72 0.5/0.82 2.2/2.2 3.5/3.5 6.0/6.0 70 8.0 15.4
AIR 80 B8/2 E 0.25/1.1 750/3000 46/75 0.5/0.85 2.3/2.3 3.5/3.5 6.0/6.0 70 8.0 17.4
AIR 90 L8/2 E 0.37/1.5 750/3000 45/75 0.48/0.9 2.0/2.0 3.5/3.5 7.0/4.0 73 12 22.5
AIR 80 A16/4 E 0.07/0.37 375/1500 10/64 0.65/0.56 1.4/2.5 1.9/2.7 2.0/6.0 66/70 5.5 15.1
AIR 80 B16/4 E 0.12/0.55 375/1500 15/71 0.58/0.65 1.8/3.3 2.1/3.5 2.0/6.0 66/70 7.7 18.7
AIR 90 L16/4 E 0.15/0.75 375/1500 16/77 0.55/0.70 1.4/2.4 1.9/2.7 2.0/7.0 70 10.9 23.7

The following versions are available:

1) by mounting: 

 - on feet (IM 1081) 

 - with flange (IM 3041, 3641) 

 - combined (IM 2081, 2181);

2) by climatic conditions: 

Electric motors can be manufactured for all climate regions (including marine, cold, tropical, etc.) on customer’s request.

3) special versions: 

- with increased slip (S) 

- with integrated thermal protection (B) 

- with hand unbreaking device (E2).