Retail:  +38 (057) 732-44-72
Wholesale:  +38 (050) 301-38-63  
  +38 (057) 771-45-98

IKOR-4 and IKOR-5 feed mills

ikor4.JPG


IKOR-4 feed mill

The feed mill is designed for grinding of wheat, rye, barley, corn and other cereals.

Operating principle of the feed mill is based on cereals breaking into pieces and further putting it through sieve. 

Spare parts set includes sieve with holes size of 3 mm for small fraction of grinding. 

Knifes of hammer type have difficult geometric shape of blade, this essentially increasing its life time. 


ikor5.JPG


IKOR-5 multi-purpose feed mill

The feed mill is designed for grinding of: 

Grinding unit consist of hammer rotor, designed for operation with cereals of different thickness.

Spare parts set includes assembled grater and appropriate frontal surface with tank for root feed, which is provided with dosing device,                                                                                                                                                       as well as sieves with holes size of 3 and 6 mm. 

Two-stage switcher is mounted on motor housing for increasing of operating safety. 


IKOR-6

The feed mill is designed for grinding of wheat, rye, barley, corn and corn cobs. Operating principle of the feed mill is based on cereals breaking into pieces and further putting it through sieve. Spare parts set includes sieve with holes size from 3 mm to 6 mm for different fraction of grinding. Knifes of hammer type have difficult geometric shape of blade, this essentially increasing its life time.


Design advantages of IKOR feed mill:

The mill is provided with protective relay. Automatic device switches off electric motor in time in case of malfunction operating modes excluding the possibility of motor breakage. 

Limit switch prevents switching on of feed mill in case of removed frontal surface during the maintenance of grinding mechanism. 

Grinding mechanism unit of hammer type is made of high-strength engineering steel. It reduces essentially load on the motor and increases its life time.

Round location of sieves provides high quality of grinding. Basic configuration provides sieve with holes size of 4 mm for middle fraction of grinding.

In the feed mill are set closed-type bearings, which do not need lubrication replenishment. 

The feed mill housing is painted inside and outside with firm powdered color.

IMG_0769.JPG IMG_0771.JPG

IMG_0793.JPG


                                                                                      Technical characteristics

Parameters IKOR-4 IKOR-5  IKOR-6
Efficiency, kg/h:  
cereals 150 180 120-150   
mealie - 75     72
juicy roots - 500  
Voltage, V 220 220     220
Input, W 1350 1350 1350
Rotation frequency, prm                         3000 3000 3000
Operating mode long-term long-term long-term
Overall dimensions (l*w*h), mm         522х310х335         524х310х335      522х310х335
Weight, kg 14 17.2 15   

Electric motor: Engineering materials:
Induction single-phase capacitor electric motor;  
Network frequency — 50 Hz ;
Voltage — 220 V;  
Insulation class — F;  
Protection degree — IP68;  
Operating mode — long-term;    
Thermal relay RTT-2;
Limit switch.   
Mill housing — steel ;
Hammers — engineering stainless steel;
Load tank — steel.

Reliable electric motor and parts of work chamber are manufactured by the HELZ plant and always available in stock and service centers.

Certificates:

Ros IKOR.JPG Ukr IKOR04.JPG Ukr IKOR05.JPG